DescriptionSilkscreen Printing Fluorescent Ink,
Fluorescent Ink Neon orange, water-based screen printing ink
Easy to use , It looks as good as other types of ink, it feels better to the touch,
it’s better for the environment, it’s cleaner and it’s easier to both use and clean up.
It’s the only ink option if you’re printing at home, they aren’t harmful and they are drain safe.
allowing flexibility in application
and optimisation in appearance of the printed article.
Our water-based Silkscreen Printing Fluorescent Ink Neon orange
is suitable for paper, board and textiles.
Use smooth or coated paper for the best result,
All colours are non-toxic, non-flammable,
solvent-free and washfast when set on a suitable heat,
such as a household iron set to medium or high.
Please remember to use a towel or piece of paper
to prevent direct contact between the source of heat and the fabric.
Inks glow under ultra violent (UV) light / black light
and create noticeable or extra-bright colour contrasts
Fluorescent Ink Neon orange, look neon under UV light and fluorescent lamps.
it also has a matt finish with a soft hand feel,
which you would expect from a quality water based ink.
Our range is ecological because it’s Formaldehyde free, Apeo free, PVC free and Heavy Metal free.
It also follows the OEKO-TEX Standard 100.
WE SUGGEST To print it with a 34-77T mesh.
Cure in a dryer at approximately 160°C for 3 minutes,
other methods can be used such as heat press, flash cure,
but also you can use the additive cold cure and wash test.
Use with sunlight stencil Dual Emulsion.
CLEAN UP Warm water, no need for harsh chemicals.
MIXING Pantone mixing is not available with the fluro range,
however please see our standard colour range in order to match pantone references.
COLOURS 30 standard colours available, plus Gold, Silver and Silkscreen Print Fluorescent Ink Neon orange
FABRICS Water based printing paste suitable for cotton, poly-cotton, jersey and lycra.
STORAGE Please keep in a cool dry area, keeping the lids on and closed when not in use.
You can add the cold cure catalyst if you want to dry it at room temperature.
The pot life of the ink, after adding the cold cure catalyst, is normally 8 hours.
This catalyst also helps to increase the washing resistance on special fabrics too.
All times are a suggested approximate guideline
to printing, times and temperatures may change due to other printing requirements.
We always recommended to do a test print and wash test before running any job.